This is the latest (main) BeagleBoard documentation. If you are looking for stable releases, use the drop-down menu on the bottom-left and select the desired version.

Update software on BeagleBone AI-64

Production boards currently ship with the factory-installed 2022-01-14-8GB image. To upgrade from the software image on your BeagleBone AI-64 to the latest, you don’t need to completely reflash the board. If you do want to reflash it, visit the flashing instructions on the getting started page. Factory Image update (without reflashing)…

1sudo apt update
2sudo apt install --only-upgrade bb-j721e-evm-firmware generic-sys-mods
3sudo apt upgrade

Update U-Boot:

to ensure only tiboot3.bin is in boot0, the pre-production image we tried to do more in boot0, but failed…

1sudo /opt/u-boot/bb-u-boot-beagleboneai64/
2sudo /opt/u-boot/bb-u-boot-beagleboneai64/
3sudo reboot

Update Kernel and SGX modules:

1sudo apt install

Update xfce:

1sudo apt install

Update ti-edge-ai 8.2 examples

1sudo apt install ti-edgeai-8.2-base ti-vision-apps-8.2 ti-vision-apps-eaik-firmware-8.2


1sudo apt autoremove --purge