This is the latest (main) BeagleBoard documentation. If you are looking for stable releases, use the drop-down menu on the bottom-left and select the desired version.

Accessories

Todo

We are going to work on a unified accessories page for all the boards and it should replace this.

Cases

Cable assemblies and sub-assemblies

Beware; purchased pre-made connector assembly wire colors may not reflect true pin designations. These assemblies are readily available from Digi-Key, SparkFun, Hobby King, Pololu and Cables and Connectors.

JST Connector Bundle

Renaissance Robotics JST Jumper Bundle

Four of the 2-pin JST ZH (1.5mm pitch) connectors, with 150mm 28AWG wires, for motors,
Eight of the 4-pin JST SH (1mm pitch) connectors, with 150mm 28AWG wires, for encoders, UART, I2C, CAN, PWR, and
Four of the 6-pin JST SH (1mm pitch) connectors, with 150mm 28AWG wires, for SPI, GPS, GPIO, ADC.
Renaissance Robotics JST Jumper Bundle

Conrad BeagleBoard Kabel BB-Blue-Kabelset

10x 4-Pin JST-SH
6x 6-Pin JST-SH
4x 2-Pin JST-ZH
1x 3-Pin JST-ZH
BeagleBoard Kabel BB-Blue-Kabelset (Conrad.de)

Motors

2-wire JST-ZH (1.5mm pitch)

DSM

3-wire JST-ZH (1.5mm pitch)

microUSB

standard

Batteries

2S1P LiPo with 3-wire JST-XH (2.5mm pitch) charge connection

Power supplies

12V with 5.5mm/2.1mm center positive

USB devices

SPI devices

Bluetooth devices